Introduction of 150 watt cylindrical lamp:
Today, lighting appliances such as lamps have a large share of the market and are produced in different types and for different uses, and among these, LED lamps are a good alternative to old incandescent and high-consumption lamps. 150 watt cylindrical lamp is one of the series of cylindrical lamps of Taktab company that has the desired and uniform exposure with minimum energy consumption, which is 13500 lumens of light (lumen is a unit of light measurement that is equal to the amount of light provided by a source Spreads evenly).
The 150 watt cylindrical lamp is in the A + energy class (the closer this rating is to the letters A or the same color green, the more desirable the performance and high efficiency, given that the green color indicates purity and low consumption of the lamp.) Which is more welcome compared to energy saving and incandescent lamps.
The 150 watt cylindrical lamp of Tak Tab Company is also one of the LED lamps in which SMD technology is used. In this technology, all the parts are pre-made and connected to the printed circuit board using solder. For cases where we need uniform light throughout the environment or do not want the amount of light to be too high, the use of SMDs will be a priority.
These products have a higher beam angle than round bulb lamps, which can be used depending on the need and type of consumption. The beam angle in LED lamps is the angle between two hypothetical lines that are considered in the plane passing through the axis of the light beam, which passes through points where the light intensity is 50% of the light intensity in the axis of the beam. If two lamps with the same luminous flux have different beam angles, the light emitted from the lamp with a lower irradiance angle will be brighter than the light emitted from a lamp with a higher irradiation angle. The 150 watt cylindrical lamp has a radiation angle of 200 degrees.
Its simple shape and beautiful design make it possible to use it in industrial workshops, factories and also large indoor halls. Its body is made of aluminum (for better heat transfer) and has unbreakable and resistant bubbles and E40 aluminum cap. These lamps are produced in dimensions of 286 x 58 mm and have a lifespan of 15,000 hours.
Like other lamps of Taktab Company, 150 watt cylindrical lamps are marketed in two colors: warm white (3000 K) and day light (6500 K). These numbers are the color temperature, measured in Kelvin, and express the brightness and color of the light lamp.
Terms of use of these lamps:
- Can be used in cold, dry and wet environments.
- Do not place this product near flammable objects such as paper or cloth.
- Do not use in places with the possibility of water spill or at very high temperatures.
- Avoid hand contact with the product when it is on or shortly after turning off due to high heat.
Advantages of SMD lamp:
- The SMD lamp emits light evenly, so the light produced by this lamp is not glare.
- These lamps generate little heat and also have a small volume.
- Frequent switching on or off the SMD lamp does not shorten the life and damage the lamp.
- The speed of turning on and reaching the maximum brightness in the SMD lamp is less than 20 microseconds, which is much less than other lamps.
- The amount of light in most lamps decreases after a while, but in all LED lamps, especially SMD lamps, this does not happen and does not drop significantly.
Related products:
Reviews
There are no reviews yet.