Introducing 10 watt downlight panel light
10 watt backlight panel light in its indoor building has a technology called SMD that these SMDs emit light evenly in space. In fact, 10 watt backlight panel light consists of a screen that has a large number of LEDs. Is located on this page. These lamps are also available in two types: warm white (3000 K) and day light(6500 K) (numbers in parentheses are color temperature or color temperature, which is measured in Kelvin, indicates the brightness and color of light).
Features of this product:
In backlight products, as the name implies, the light source is located just behind the reflector screen. It is a light source consisting of a large number of LEDs that are regularly placed on it. The same order and spacing of LEDs mounted on a screen is very important as a light source because light must be emitted evenly from that surface. The output is almost uniform. Otherwise, the light concentration will be seen in more and less points, which may create a visual unattractiveness in your space. The amount of light produced by this lamp is 900 lumens (lumen is a unit of light measurement that is equal to the amount of light that is uniformly emitted by a source) and the lifespan is 15,000 hours.
The backlight panel has a strong and sturdy body made of ABS that is strong against impact and plays a major role in discharging heat from the lamp. These types of lamps are used to design decoration and lighting in a new style and are used in homes, offices, hotels and restaurants.
The 10 watt backlight bulb is in the A + energy category (the closer this rating is to the letters A or the same color green, the more desirable the performance and efficiency, given that the green color indicates purity and low consumption). Indicates the top of the lamp.) Which is more welcome compared incandescent lamps.
Installation Method:
The backlight panel lights are built-in and, as its name implies, are installed inside the work, and we see only a part of it, and this lamp model, in addition to being beautiful, takes up less space. Installing these types of lights may be a bit more complicated than other types of lighting and will require more calculations. Before starting work, it is best to get a general view of the room you are going to light on paper and start moving the lights from a focal point that is most important.
Do not forget that the main factor in achieving proper lighting is the proper distances between the lights. In general, the distance between two built-in lights is about half the height of the ceiling to the floor and the distance from the light to the wall is about a quarter of this value. The important point is that depending on the amount of light and the angle of radiation, this distance can be more or less than the amount mentioned. Choose the type of built-in lamp according to the desired amount of light and the specifications of the lamp. For 10 watt backlight lamps, we have to cut the ceiling by 10 cm.
Advantages of SMD lamp:
The SMD lamp emits light evenly, so the light produced by this lamp is not glare.
These lamps generate little heat and also have a small volume.
Frequent switching on or off the SMD lamp does not shorten the life and damage the lamp.
The speed of turning on and reaching the maximum brightness in the SMD lamp is less than 20 microseconds, which is much less than other lamps.
The amount of light in most lamps decreases after a while, but in all LED lamps, especially SMD lamps, this does not happen and does not drop significantly.
Reviews
There are no reviews yet.